CTM 916

​The Automatic Elbow Machine is designed to produce high quality straight elbows, which can be hand turned to any angle between 0° and 90°.  The cutting plane of this machine is 15° from the horizontal plane, thus requiring 3 cuts for a 90°(+/-1) elbow.  Only one operator is required. This machine is equipped with a full set of tooling to produce 9", 10", 12", 14", 16" Ø elbows; or tooling can be purchased separately if only a few select sizes are needed.  Size changes take only 20-25 minutes to complete.

• Safety
• Productivity
• Features
• Recommended Material

<

>

• The CTM 916 has full safety features; including warning labels, an emergency stop button, and yellow guards.
  
• CE safety is provided  for UK and  EU countries

Machine cycle time = 20 seconds or less for all sizes

Load time = 2 seconds (dependent upon speed of operator)

Complete Elbows:

• 3.2 per minute
• 190 per hour
• 1500 per 8 hour shift
• 375,000+ per year (1 shift/day; 5 days/week; 50 weeks/year)

• Pre-programmed p.l.c. (Allen-Bradley MicroLogix 1400)
• Proportional valve with precise ramping control of gear head
• Easy-to-use operator interface
• Electrical: 230/460 VAC 3Ø​
• Integrated lubricating system​
• Hardened and heat-treated tooling​
• Remote Access Device for quick easy remote troubleshooting

• 9",10" = 0.014" - 0.024" thk. galvanized
• 12",14" = 0.016" - 0.024" thk. galvanized
• 16" = 0.017" - 0.024" thk. galvanized