CTM 345-456-678

​The Automatic Elbow Machine is designed to produce high quality straight elbows, which can be hand turned to any angle between 0° and 90°. The cutting plane of these machines is 15° from the horizontal plane, thus requiring 3 cuts for a 90° (+/-1)​ elbow. Only one operator is required. (see the CTM 916 for larger size elbows) The Elbow Machine is available in any of the 4 size configurations noted above. They are equipped with a full set of tooling to produce the respective 3 sizes of elbows; or tooling can be purchased separately if only 1 or 2 sizes are needed. Size changes take only 15-20 minutes to complete.

• Safety
• Productivity
• Features
• Recommended Material

<

>

• Elbow machines have full safety features; including warning labels, an emergency stop button, yellow guards, and a yellow wire mesh safety frame.
  
• CE safety is provided  for UK and  EU countries

Machine cycle time = less than 18 seconds for all sizes

Load time = 1 second (dependent upon speed of operator)

Complete Elbows:

• 3.7 per minute
• 220 per hour
• 1775 per 8 hour shift
• 440,000+ per year (1 shift/day; 5 days/week; 50 weeks/year)

• Pre-programmed p.l.c. (Allen-Bradley MicroLogix 1400)
• Proportional valve with precise ramping control of gear head
• Positioning of cutting heights
• Easy-to-use operator interface
• Electrical: 230/460 VAC 3Ø
• Integrated lubricating system
• Hardened and heat-treated tooling
• Remote Access Device for quick easy remote troubleshooting

• 0.012" - 0.024" thick galvanized sheet metal (0.010"-0.011" possible, depending on material quality)