ARM 36-610

The new Automatic Reducer Machine is designed to produce high quality tapered reducers/increasers.  It has two workstations which each form a locking rib; one on the larger end of the reducer and one on the smaller end.  Only one operator is required.

The Reducer Machine is available in the 2 size configurations noted above (other sizes available upon request).  The ARM 36 is equipped with a full set of tooling to produce any combination of sizes between 3" and 6" Ø, in 1" increments.  The ARM 610 is equipped with a full set of tooling to produce any combination of sizes between 6" and 10" Ø, in 1" increments.  Size changes take only 15-30 minutes to complete (depending on size).

Sizes produced by ARM 36:
6"-5"    6"-4"    6"-3"    5"-4"    5"-3"    4"-3"

Sizes produced by ARM 610:
10"-9"     10"-8"     10"-7"     10"-6"     9"-8"
9"-7"      9"-6"      8"-7"      8"-6"     7"-6"

• Safety
• Productivity
• Features
• Recommended Material

<

>

• Reducer Machines have full safety features; including warning labels, an emergency stop button, yellow guards, and a yellow wire mesh safety frame.
  
• CE safety is provided  for UK and  EU countries

• Machine cycle time = 4 seconds for all sizes
• Load time = 11 seconds (dependent upon speed of operator)

Complete Reducers:

• 4 per minute
• 240 per hour
• 1,920 per 8 hour shift
• 480,000 per year (1 shift/day; 5 days/week; 50 weeks/year)
  ​
  
• Assuming labor cost of one operator = $25,000/year, one reducer = 5.2¢ labor to produce

• Pre-programmed p.l.c. (Allen-Bradley MicroLogix 1200)
• Proportional valves with precise ramping control of gear heads
• Easy-to-use operator interface
• Electrical: 230/460 VAC 3Ø
• No air supply required
• Integrated lubricating system​
• Hardened and heat-treated tooling

• 0.012" - 0.017" thick galvanized